Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Inglewood Homeowners
When a gate starts to sag, a hinge cracks, or a weld splits, the repair usually comes down to parts and the skill to fit them properly. Ironworks Gate Co. has been providing Inglewood Gate Parts & Welding for over 42 years, and we stock the hinges, rollers, latches, and steel needed to fix most gates the same day we arrive. Call (747) 340-9707 and you’ll reach a live person, 24 hours a day, who can tell you honestly whether your gate needs a part replaced or a weld rebuilt. We’re at 9 Salford Ave, Inglewood, CA 90301, and we’ve spent four decades earning the trust of homeowners who want the job done once, correctly, and guaranteed in writing.
Key Takeaways:
- Gate parts and welding repairs in Inglewood are usually completed in a single visit, often same day.
- We service LiftMaster, DoorKing, Elite, Mighty Mule, and every major gate brand, with OEM and properly matched parts.
- Every job is protected by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
- Upfront pricing settled before work starts. You’ll know the cost before a bolt is turned.
The gate that protects your home relies on mechanical parts that take a beating every day. Inglewood’s coastal air accelerates rust on steel and iron, and the daily opening and closing of a driveway gate slowly wears out the components that keep it aligned. When those parts fail, the gate drags, binds, or refuses to close. That’s when a homeowner needs a specialist who welds and fits parts as a single craft, not a handyman who will cobble it together and disappear. Ironworks Gate Co. is that specialist. Our home page lays out the full scope of what we do, but if you’re standing in front of a gate that won’t close or a hinge that’s pulling out of the post, you’re in the right place.
What Our Gate Parts & Welding Service Includes
Our gate parts and welding service covers the mechanical bones of your gate: the hinges, posts, rails, rollers, latches, and the welds that hold them together. Each of these components has a job to do, and when one fails, the rest of the gate suffers. Here’s what we handle, the signs that each part needs attention, and exactly what Ironworks Gate Co. does about it.
Hinge Replacement
Gate hinges carry the entire weight of the gate, and in Inglewood’s marine layer they’re the first parts to corrode. When a hinge wears out, you’ll see the gate start to lean, scrape the ground, or swing unevenly. Ironworks Gate Co. replaces worn hinges with properly rated hardware matched to your gate’s weight and size, and we weld or bolt them in so the gate hangs true again.
Post Replacement
A loose or rotting gate post undermines everything else. We see this often with older Inglewood gates where a steel post has rusted at the base or a concrete footing has cracked. We remove the old post, set a new one to the correct depth and alignment, and weld the gate brackets back on, so the gate opens and closes without wobbling.
Rail Repair
Gate rails are the horizontal frame members that hold the pickets or panels in place. When a rail bends or the welds crack, the gate loses its shape. We straighten what can be saved and replace what can’t, then weld it back to factory alignment. The gate should look and close like it did when it was new.
Custom Welding
Not every repair is a straight parts swap. When a gate frame cracks, a decorative element snaps, or a homeowner wants a modification, the answer is steel welded correctly. Our fabricators carry mobile welding rigs to your Inglewood driveway for Best Gate Parts & Welding in Inglewood, CA, and we match the metal and the method to your existing gate. Victor Salinas has built this company on welds that hold, not welds that hide the problem for a season.
Gate Rollers
Sliding gates run on rollers, and when those rollers flatten, bind, or break, the gate grinds along the track. In Inglewood, we replace rollers with the correct size and bearing type for your particular track, then adjust the guides so the gate rolls quietly and stops exactly where it should. A roller that’s left to grind will eventually destroy the track, and that’s a much bigger job.
Latch & Lock
A gate that won’t latch is a gate that won’t stay shut, and for many Inglewood homeowners that’s a security concern. We service and replace mechanical latches, magnetic locks, and the strike plates they catch on. We also make sure the release works properly from both sides. A repaired latch should hold firmly, open easily with the right key or code, and never need a hip-check to close.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
Most gate repairs don’t start with the brand. They start with the part that failed. But the brand matters because the right part and the right fit come from knowing how each manufacturer builds its gates. LiftMaster, for example, designs its automated gates to pair with specific hinge spacing and rail tolerances. We’ve serviced enough LiftMaster installations across Inglewood to know those tolerances, and we stock the hardware that matches them.
DoorKing and Elite gates are more common on the larger estate properties in Ladera Heights and the hills above Inglewood, and those gates are heavier, stiffer, and less forgiving of a poorly fitted hinge or an undersized roller. We service them with the correct parts and the correct welds, and we’re certified on their automation systems so the mechanical repair doesn’t fight the motor’s torque. Whether you have a Mighty Mule unit on a residential swing gate or an older unit no one remembers the make of, we can identify it, source the part, and fit it correctly. If you’re also dealing with a motor problem, our Gate Parts & Welding in Westmont page covers the same scope for our neighbors a few minutes south.
Signs You Need Gate Parts & Welding Right Now
- The gate drags or scrapes the ground. This usually means a hinge has worn or a post has shifted. The longer it drags, the more the frame twists, and a twisted frame is a much more expensive repair than a hinge replacement.
- The gate leans or sags toward the latch post. A sagging gate is a hinge problem or a post problem, and in either case the weight is pulling the whole structure out of alignment. Fixing it now keeps the welds from cracking under the strain.
- You see rust stains or flaking metal at the hinges or post bases. Inglewood’s coastal air means salt is working on your gate year-round. If the rust is visible, the metal underneath is thinning fast. A treated replacement now beats a snapped hinge at midnight.
- The gate bounces or vibrates when it moves. That’s often a worn roller or a cracked rail, and the vibration is shaking every weld on the gate loose. It’s a warning sign that should get attention before something breaks outright.
- The latch won’t stay engaged or takes force to close. When a gate needs force to close, the latch and the hinge plane are out of agreement. Forcing it works until the day it doesn’t, and then the gate either won’t lock or won’t close at all.
One thing worth saying plainly: none of these problems get better on their own. Metal doesn’t heal. A homeowner who calls at the first sign of a scrape is going to pay less than the one who waits for the crash. If you’re in the city of Hawthorne and your gate fits any of these descriptions, our Gate Parts & Welding in Hawthorne page covers how we handle the same repairs across the 405.
Our Gate Parts & Welding Process - Step by Step
- 1
You call, a live person answers. We don’t route calls through a voicemail tree. You’ll speak to a person who understands gates and can ask the right questions about what you’re seeing and hearing. That conversation is free, and it gives us an idea of what to load on the truck.
- 2
We inspect the gate and explain the problem. The technician uses a straight edge, a level, and a hands-on check of every hinge, roller, and weld to pinpoint what’s actually failing, not just what’s most obvious. We show you what we find and explain it plainly.
- 3
You get a written, upfront price. Before any work starts, you’ll see the number. We settle the price while the toolbox is still closed. If you have a written estimate from another company, we’ll offer a free second opinion on it and you can compare honestly.
- 4
We do the repair or the weld right then. Most parts replacements and welding jobs are finished in one visit. The truck carries the common parts for Inglewood’s gate stock, and our mobile welders can rebuild on-site without dragging your gate back to a shop.
- 5
We test it and stand behind it. The gate gets opened and closed, loaded and unloaded, until we’re sure it runs the way it should. Then we give you the 90-Day Done Right Promise in writing. If something’s not right, call. We come back. No arguing.
How Much Does Gate Parts & Welding Cost in Inglewood?
Gate parts and welding prices in Inglewood depend on what failed and how far it’s gone. Here are typical ranges we see across the city:
| Service | Typical Price Range |
|---|---|
| Hinge replacement (single gate) | $150 - $400 |
| Post replacement (single post) | $350 - $900 |
| Rail repair or reinforcement | $200 - $600 |
| Custom welding (per repair point) | $100 - $350 |
| Gate roller replacement | $120 - $450 |
| Latch and lock replacement | $80 - $300 |
What moves the price is the weight of the gate, the condition of the surrounding steel, and whether a simple part swap turns into a structural correction. A hinge on a light ornamental gate is a quick job. A hinge on a 20-foot steel estate gate with a rusted post is a different day’s work. You’ll never pay more than the number we agree on before the work starts. Our estimates are free, and the $50 Off Any Repair Over $250 offer applies to most gate parts and welding jobs. If you’re over 55 or a veteran, you get 5% off, always, on top of any other offer. For a straightforward seasonal check, the $89 Tune-Up includes a full mechanical inspection so small problems get caught before they become big bills.
Gate Parts & Welding Near Inglewood - Our Service Area
Ironworks Gate Co. services Inglewood and every community around it, including Ladera Heights, Westchester, Culver City, El Segundo, Lawndale, Gardena, West Athens, Manhattan Beach, and Playa del Rey. Most parts and welding jobs are scheduled within a day or two, and many can be handled same day when the call comes in early. If you’re just across the line in Westmont or Hawthorne, the same technicians and the same written guarantee apply.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well, and we also offer our Gate Parts & Welding in Hawthorne. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Inglewood
Gate parts and welding is the repair of the physical components that hold your gate together and let it move: hinges, posts, rails, rollers, latches, and the welded joints between them. It doesn’t cover the motor, which is a separate system, though the two often need attention at the same time. We handle both.
Most parts replacements and most welds are finished in under two hours on-site. The exception is a post replacement, which often takes half a day because the concrete footing needs to set before the gate can be re-hung. We’ll tell you the expected time before we start.
Most jobs run between $100 and $600, with post replacements at the higher end. The exact number depends on the size and condition of your gate, and we give you a written price before any work begins. Estimates are free, so call (747) 340-9707 and we’ll give you a real number, not a guess.
Yes. We’re trained and equipped on LiftMaster, DoorKing, Elite, Mighty Mule, and five other major brands, so the mechanical repair matches the automation. We stock the common parts for these brands and can source the rest quickly. Whatever brand you have, we can fix it properly.
A gate that won’t close or won’t lock is a security problem, and we treat it like one. A live person answers the phone 24 hours a day, and we schedule Emergency Gate Parts & Welding in Inglewood, CA callouts for exactly those situations. Call (747) 340-9707 and describe what’s happening. We’ll get someone there as fast as the schedule allows.
Yes, in writing. Every job gets our 90-Day Done Right Promise, which means if the repair doesn’t hold, we come back and fix it at no charge. No paperwork to file, no argument to make. That’s the standard, and we’ve kept it for over 42 years.
Clear the driveway so the gate has room to swing or slide fully open, and if you have a key or a manual release for the motor, have it handy. That’s it. We’ll handle the inspection, the diagnosis, and the repair, and we’ll leave the area as clean as we found it.
Schedule Your Gate Parts & Welding Service in Inglewood Today
A gate that’s sagging, scraping, or refusing to close won’t fix itself, and every week it goes unaddressed makes the repair larger. Call Ironworks Gate Co. at (747) 340-9707 for a free estimate and an honest answer about what’s wrong and what it costs. The price is set before the tools come out, and the work is guaranteed in writing. Done right, and backed.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood since 1984.