Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Inglewood Homeowners
Gate installation in Inglewood typically costs between $3,800 and $18,000 depending on the gate type, material, and automation package, with most standard driveway gates running $5,500 to $9,500 installed. We’re Ironworks Gate Co., and we’ve been hanging gates across Inglewood since 1984, led by Victor Salinas, a craftsman who built this company on a simple principle: the 400th job gets the same care as the first. When you call (747) 340-9707, a live person answers, day or night, and we’ll schedule a free on-site measure and written price before any work begins.
What Our Gate Installation Service Includes
Every our Gate Installation in Inglewood starts with a site walk. We check the driveway slope, the existing posts or footings, the power access point, and how the gate will swing or slide in the available space. Then we build the job around what we find, not around a catalog photo. Here’s what we install:
Driveway Gate
A Best Gate Installation in Inglewood, CA starts with a driveway gate, the full-width gate across your vehicle entrance, usually automated, and it’s the single biggest visual and security statement on your property. Inglewood lots vary widely, from the 5,000-square-foot parcels near Centinela to larger estate-style homes up in Ladera Heights, and the driveway gate needs to fit both the opening and the neighborhood’s setback rules. We handle the complete install: footings, posts, gate fabrication or assembly, opener mounting, safety edges, and final adjustment so the gate closes square and quiet.
Pedestrian Gate
A pedestrian gate is the smaller walk-through gate beside or within your main gate, and it gets more daily use than anything else on the property. That’s why we hang them on heavy-gauge hinges and set the posts deeper than the minimum, because a pedestrian gate that sags after two years is a pedestrian gate that wasn’t installed right. We build these to match your driveway gate so the pair looks like it was designed together, and we can add a keypad or intercom on the pedestrian side as well.
Sliding Gate
A sliding gate rides on rollers and a track, and it’s usually the right call when the driveway slopes up from the street and a swing gate would drag. We see this all the time in Inglewood, especially on the older lots along Manchester and Arbor Vitae where the driveway pitch is steep. Sliding gates want a level track, a solid cantilever or track system, and a motor that’s rated for the gate’s full weight, and we spec all three from the first measure.
Swing Gate
A swing gate pivots on hinges, either single-leaf or double-leaf, and it’s the classic look most Inglewood homeowners want. The catch is that swing gates put nearly all their stress on the hinge posts, so the footings have to be big, deep, and cured before the gate goes on. We pour our corner and gate post footings at least 24 inches deep with rebar, and on heavy double gates we go deeper and wider, because a 400-pound gate leaning on a shallow post is a gate that will bind within a year.
Double Gate
A double gate is two leaves that meet in the middle, and it’s the right answer for wide driveways that a single gate can’t cross without looking oversized. The challenge that separates a good double gate install from a callback is getting both leaves to land flush every single time. We set the center stop, adjust the operator limits, and tune the opener force so the gates meet cleanly without slamming or bouncing back, then we lock in those settings and show you what we did.
Security Gate
A security gate is heavy, full-height, and meant to stop someone from pushing through or climbing over. Several Inglewood homeowners near the 405 and the commercial corridors ask for Emergency Gate Installation in Inglewood, CA after a break-in attempt, and we’re honest about what a gate can and can’t do. We build security gates from steel tube and pickets, set posts in reinforced concrete, and pair them with an opener strong enough that the gate doesn’t strain the motor, so the whole assembly works when you need it to.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
Most of the automated gates we install in Inglewood use LiftMaster or DoorKing openers, and we’ve mounted and programmed hundreds of both. On LiftMaster we’re comfortable with the full line from the residential LA400 and LA500 arms up through the heavier-duty slide operators, and we stock the common control boards and safety parts so an adjustment rarely means waiting on a shipment. With DoorKing, we’ve worked on swing and slide operators, the 9150 and 9100 series, and enough replacement loop detectors that we can typically diagnose a sensor problem on the first visit.
Elite and Mighty Mule show up on the lighter driveway gates and ranch-style installations, and we service those as readily as the commercial-grade brands. Every operator gets set up with the photo eyes and safety edges calibrated to the gate’s actual travel, not the factory default, because a mis-set safety edge is the difference between a gate that stops and a gate that pushes. Whether your Inglewood home ends up with any of these brands or something older that’s already on the wall, we’ll install and program it correctly. That’s part of the Ironworks Gate Co. promise, and it’s written into every job.
Signs You Need Gate Installation Right Now
- The old gate scrapes or drags when it opens. That’s usually the tell that a post has shifted, a hinge has worn, or the original installer never set the post deep enough. In Inglewood’s clay-heavy soil, which expands and contracts through the wet and dry seasons, posts move more than people expect, and a gate that scrapes is working against its own frame every single cycle.
- You’re propping something against the gate to keep it closed. This is more common than you’d think, and it’s dangerous. A gate that won’t stay latched is a gate that can swing into a car door, a child, or a delivery person. If you’re using a brick or a bungee cord to hold the gate shut, the mechanical fix is overdue and a fresh installation is often the cheaper repair.
- The motor runs but the gate barely moves. When an opener strains and the gate inches along, either the motor is undersized for the gate’s weight or the gate’s geometry has drifted. We see undersized motors on a lot of Inglewood gates that were installed by general handymen, and the long-term fix isn’t a bigger motor bolted to the same worn hardware, it’s a correctly paired gate and operator.
- The hinges or posts show rust bloom or cracking at the base. Salt air travels inland from the coast more than most homeowners expect, and combined with irrigation overspray it works on steel year-round. If the post base is flaking or the hinge barrels are reddish-brown, the structure has lost metal where it matters most, and no amount of paint will restore the load capacity.
- Your gate is wood and the bottom rail has soft spots. Wood gates look right on some Inglewood homes, but once water works into the joinery the gate swells, sags, and eventually splits. If a screwdriver sinks into the bottom rail or a picket feels spongy, the honest fix is replacement with steel or a properly sealed new build rather than patching what rot has already claimed.
Our Gate Installation Process - Step by Step
- 1
Measure and site check. Victor or one of our senior technicians comes to your Inglewood property and measures the opening, the setback, the driveway slope, and the available power. We’re looking for the things that don’t show in photos: a buried sewer lateral under the post location, a low phone line crossing the arc of a swing gate, or a slope that dictates sliding over swinging. You’ll get a written line-item price before you commit to anything.
- 2
Footings and posts. We dig to below grade, set rebar, and pour concrete that cures before the gate hangs. On heavy double gates and security gates, we’ll over-excavate and use deeper footings than code minimum. The steel posts get set in wet concrete and braced true, then we leave them to cure on their own schedule. No gate of ours hangs on a green footing.
- 3
Gate fabrication and assembly. For custom steel work we weld the frame square on a table, then fit the pickets and panels to the exact opening measured on site. Pre-fabricated gates come through the same shop check: we inspect every weld, every hinge barrel, and every picket before it leaves our yard. If a gate arrives with a bad weld, it never gets near your driveway.
- 4
Operator mounting and programming. We mount the opener on its bracket, align the arm or chain, and program the travel, the force limits, and the safety edges. The photo eyes get set at the correct height and tested with an actual obstruction, not just a visual check. We run the gate through a minimum of ten full cycles, listening for any bind, any strain, any noise that shouldn’t be there.
- 5
Walkthrough and guarantee. Before we leave, we walk the job with you. We show you how the manual release works, where the keypad sits, how the safety features respond, and what the gate sounds like when it’s right. Then we leave the 90-Day Done Right Promise in writing. No paperwork to file, no phone tree to fight. If something’s not right, we come back and make it right.
How Much Does Gate Installation Cost in Inglewood?
A typical driveway gate installation in Inglewood runs $5,500 to $9,500 for a standard steel single swing gate with a quality automated opener. A simpler pedestrian gate might start around $3,800, and a heavy security gate or long sliding driveway gate can reach $15,000 to $18,000 depending on the steel weight, opener size, and site conditions. Those are real numbers from our Inglewood jobs, not national averages that don’t account for our soil, our setback requirements, or our permit process.
What moves the price: gate length and weight, whether it swings or slides, the opener brand and horsepower, how much concrete the footings need, and whether power has to be trenched to the gate location. A swing gate on a flat lot is the most economical configuration. A sliding gate on a steep driveway costs more because the track and roller system have to be built level, and the operator has to work harder. We’ll never pad a quote with things you don’t need, and every price is settled before a single bolt is turned. Phone (747) 340-9707 and we’ll send a technician to measure your site and hand you a written number.
Gate Installation Near Inglewood - Our Service Area
We work throughout Inglewood and the surrounding communities, including Westmont, Hawthorne, West Athens, Ladera Heights, Westchester, El Segundo, Culver City, Lawndale, Gardena, Manhattan Beach, and Playa del Rey. Most Inglewood jobs get scheduled within the same week, and if you’re in one of our neighboring service areas, you’ll see the same technicians and the same written guarantee. Whether you’re checking Gate Installation in Westmont or Gate Installation in Hawthorne, it’s the same Ironworks Gate Co. standard, and the same 42 years behind it.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Inglewood
Gate installation is the complete process of setting footings, posts, the gate itself, and on most jobs the automated opener that moves it. We handle the whole scope in Inglewood, from site measure through concrete pour, steel fabrication or assembly, operator programming, and final testing, and we also offer Hawthorne Gate Installation for nearby properties. When you hire us, you’re not coordinating a welder, a concrete crew, and an electrician. One company handles it all under one written price.
Most standard driveway gate installations in Inglewood take two to three days from first dig to final walkthrough, with a break in the middle for the concrete footings to cure. Custom security gates and long sliding gates can run four days or more. We’ll give you a schedule at the estimate, and we show up when we say we will.
In Inglewood, expect $5,500 to $9,500 for a typical automated steel driveway gate, less for a pedestrian gate, and more for heavy security or custom sliding work. We hand you a written, line-item quote before any work begins, so the number you approve is the number on the final invoice. Call (747) 340-9707 and we’ll measure your site for free.
Yes, we install and program LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls openers, so whatever brand fits your gate and budget, we’ll mount it and set it up correctly. If you already have an opener in mind or one that’s been recommended, we’ll work with it. If you don’t have a preference, we’ll recommend the right unit for the gate’s size and weight, not the one with the best marketing budget.
We’re a gate installation and repair company, not a dispatch service, and installations get scheduled for a measure and a written quote first. But if your gate has failed and the job turns into a repair rather than a full install, we can often get to Inglewood the same day. A live person answers the phone 24 hours a day at (747) 340-9707, so call and we’ll tell you straight what’s possible.
Every gate installation we complete is covered by our 90-Day Done Right Promise, in writing, no paperwork, no arguing. If something isn’t right in those 90 days, we come back and make it right, every time. Manufacturer warranties on the opener and hardware apply on top of that, and we register those for you before we leave the job.
Clear the vehicles out of the driveway and make sure the gate area is accessible from both sides. Mark any underground sprinkler lines or invisible fence wire if you have them, and if you have pets, keep them inside on install day. We’ll handle everything from the property line’s perspective: digging, pouring, wiring, and cleanup before we leave.
Schedule Your Gate Installation Service in Inglewood Today
Call (747) 340-9707 to schedule a free measure and written quote for your Inglewood gate installation. Victor Salinas leads every estimate personally, and you’ll get a square price from a company that has been working in this city since 1984. The 90-Day Done Right Promise is in writing on every job. No surprises, no pressure, no voicemail tree.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood since 1984.