Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Inglewood
Gate parts and welding in Inglewood usually comes down to one of two jobs: repairing a 50-year-old wrought iron gate that’s sagging from a corroded hinge post, or fixing storm and wind damage that’s left a gate twisted out of plumb. Most Inglewood homeowners don’t need a new gate. They need the right part, welded correctly, to a post that’s actually set in solid ground. Ironworks Gate Co. handles that work every week here, with crews that know the difference between a panel problem and a footing problem. Call us at (747) 340-9707 and we’ll send someone who can tell you the difference before touching a single bolt.
Why Ironworks Gate Co. Is Inglewood’s Preferred Gate Parts & Welding Company
We’ve been doing gate work for over 42 years, and the Inglewood calls we get tend to have a familiar shape. A 1959 bungalow near Centinela and Arbor Vitae. A wrought iron gate that’s been on the driveway longer than the current owner. A hinge post that’s rusted through at the concrete line because the marine layer from El Segundo keeps the hardware damp more nights than not. We know these houses, and we know these gates, because we’ve been out to this part of the city for decades. Our Gate Parts & Welding team sees more hinge post replacement and sag correction in Inglewood than almost anywhere else in the LA area.
When you call, a live person picks up. Always. Not a voicemail, not an answering service. We’ll book a time, give you an upfront price before any work starts, and show up when we say we will. Every job is covered by our 90-Day Done Right Promise, in writing. If it’s not right, we come back and make it right. That’s the standard on the first gate we ever welded and the one we’ll weld next week.
Our Gate Parts & Welding Services in Inglewood
Hinge Replacement
On Inglewood’s post-WWII bungalows, the original gate hinges are usually forged steel that’s been fighting coastal moisture since the Eisenhower administration. Hinge pins seize, the knuckles wear egg-shaped, and the gate starts dragging on the driveway. We replace the hinge with a correctly sized barrel or strap hinge, weld it to the frame, and rehang the gate so it swings without binding. A typical hinge replacement in Inglewood runs $180-$420 depending on how much cutting and welding the old one requires.
Post Replacement
The post is the part most people don’t see until it’s too late. In Inglewood, ground posts corrode at the concrete line from years of moisture wicking up from the soil. When the post rots or shifts, the whole gate sags, no matter how good the panel looks. We dig out the failed footing, pour a new concrete base, set a fresh steel post, and weld the hinges back on. Post replacement here generally runs $350-$800 depending on the depth of the footing and whether we’re also correcting the gate’s alignment.
Rail Repair
Storm wind rattles gates, and Inglewood gets enough gusts off the coast to flex the rails on older tubular steel gates over time. Cracked welds at the frame corners let the panel twist, which puts more stress on the hinges and latch. We grind out the failed weld, realign the rail, and lay down a full-penetration weld that holds. Rail repair and frame welding in Inglewood usually runs $150-$500, depending on how much of the frame needs to be made straight again.
Custom Welding
Sometimes a factory part won’t work. A gate from the 1950s might have a hinge spacing that no modern hardware matches, or a damaged top rail with a curve that needs a hand-shaped patch. Our welders fabricate brackets, gussets, and replacement rails in the field, matched to the existing metal. Custom welding in Inglewood starts around $120-$250 for a single fabrication point and goes up from there, depending on the complexity and how much disassembly the job needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
Most of the gates we weld and repair in Inglewood carry hardware from LiftMaster, DoorKing, and Elite. We service all three, along with six other major opener and hardware brands, so when a part fails we usually have the replacement on the truck or can get it same-day. That matters when your gate won’t close the morning after a storm and you’ve got a driveway facing the street. We stock the common parts for Inglewood’s older gate styles, so you’re not waiting on a mail-order bracket while your gate sits open.
Common Gate Parts & Welding Problems We See in Inglewood Homes
- Corroded hinge pins from the marine layer. Inglewood sits about five miles from the coast, and the moisture that rolls in from El Segundo and Playa del Rey settles on unpainted wrought iron night after night. Hinge pins rust, seize, and snap, which is why most of our hinge work here starts with a pin that’s fused itself into the barrel.
- Sagging gates after winter storms. When the ground is saturated, post footings shift. The gate drops at the latch end, binds against the post, and drags on the concrete. Usually the panel is fine. The post has moved. Replacing the post and correcting the sag is a standard job for us in Inglewood.
- Twisted gate frames from wind load. A solid infill gate acts like a sail in a storm. Wind pushes the panel, the hinge post twists out of plumb, and the welds at the frame corners crack. We realign the frame, re-weld the corners, and sometimes add a gusset plate so the same failure doesn’t come back next year.
- Failed latches and locks near SoFi Stadium. Game and concert days bring foot traffic and cars through residential streets that don’t normally see it. Gates get forced, latches get bent, and auto-close mechanisms get damaged. A bent latch is a quick fix if you catch it early, and a bigger job if the striker plate has been ripped off the post.
Pricing for Gate Parts & Welding in Inglewood, CA
Here’s what we charge, in plain numbers, for the work we do most in Inglewood. Hinge replacement: $180-$420. Post replacement: $350-$800. Rail repair and frame welding: $150-$500. Custom fabrication: $120-$250 per point. Latch and lock repair: $95-$350. The price is quoted and agreed before any work starts. Not after. If the job turns out bigger than we thought when we opened it up, we stop and talk to you before spending another dollar. Call (747) 340-9707 for a free estimate on your specific gate.
Standing offers: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. A permanent 5% senior and veteran discount, on every job, always.
We Also Serve Cities Near Inglewood
Our crews working in Inglewood also cover the surrounding communities: Hawthorne, El Segundo, Culver City, and Lawndale. If you’re in one of those cities and your gate is sagging after a storm, the same team handles the work. Scheduling and dispatch are coordinated from our Los Angeles office, and crews serve the Inglewood area daily.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Inglewood
Because Inglewood sits close enough to the Pacific that the marine layer rolls in most nights, leaving a thin film of moisture on metal surfaces. That constant dampness attacks unpainted wrought iron at the hinge pins and post anchors, where water also wicks up from the ground. Inland gates dry out. Inglewood gates stay damp for hours after dawn, and that adds up over 60 years. If your hinges are seizing or the post is flaking at the concrete line, call (747) 340-9707 and we’ll tell you exactly what needs replacing.
In Inglewood, it’s usually the post. Saturated ground lets the post footing shift, and the whole gate drops at the latch end. The panel itself is often fine. We saw this on a 1950s bungalow near La Brea and Hardy: the homeowner had already paid one company to fix the panel, but it sagged within weeks because the actual failure was a corroded hinge post. We dug out the failed footing, poured a new concrete base, welded a fresh post, and rehung the original gate straight and smooth. If your gate is dragging after rain, get the post checked before spending money on the panel. Call us and we’ll come look at it.
If your gate has an automatic opener, look for the manual release mechanism, usually a small keyed lock or a pull handle near the motor or on the gate itself. Turning the key or pulling the handle disengages the gear so you can push the gate by hand. Most Inglewood homes with automatic gates have either a keyed release cylinder or a pull chain on the operator arm. If you don’t have the key, or the release is seized, don’t force it. A seized manual release is a repair we can handle quickly, and it’s exactly the kind of thing you don’t want to discover for the first time during a power cut at night. Call us to check your release before storm season.
Yes. We replace bent latch bars, striker plates, and lock hardware without touching the rest of the gate, unless the force also damaged the frame. A forced latch on a driveway gate near the stadium is a common call for us, and the repair usually runs $95-$350 depending on whether we’re bending the existing hardware back, welding in a new striker, or replacing the lock assembly. The gate can usually be made secure the same day. Call (747) 340-9707 and we’ll get it sorted.
In almost every case, we can weld new parts onto the existing gate. Old wrought iron takes a weld well if the metal around the repair point is cleaned up first. A new roller can be welded onto the bottom rail, a new hinge barrel onto the frame. The exception is if the gate has been rusting from the inside out for decades and the metal is thin enough to punch through. Even then, we usually only need to replace the panel, not the whole system. We’ll tell you straight which one it is, and put the price in writing before we start.
Contact Ironworks Gate Co. for Gate Parts & Welding in Inglewood
If your gate is sagging, squealing, rusted at the post, or just not closing like it used to, call us. A live person answers, day or night. We’ll book a time, give you a straight answer and a written price before any work begins, and stand behind the job with our 90-Day Done Right Promise. That’s how Victor Salinas and every technician at Ironworks Gate Co. works, on every gate, in every part of Inglewood. Call (747) 340-9707 for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood and the surrounding LA area.