Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Westchester
A new driveway gate in Westchester typically runs $2,800-$7,500 installed, depending on whether you need a sliding or swing configuration and whether your existing pilasters can carry the operator. We complete most single-gate installs in one to two days once materials are on site, and every job is quoted and agreed before any work starts. If you’re off Manchester Avenue, up near Loyola Marymount, or closer to the bluff side by Playa del Rey, we know the streets, the setbacks, and the salt air. Call (747) 340-9707 and you’ll get a live person who can schedule a free measure.
Westchester is not like the rest of Los Angeles. The marine layer rolls in off Santa Monica Bay most mornings. The houses were built between the late 1940s and mid-1960s. The pilasters holding your gate were poured for lightweight ornamental iron, not a 90-pound automatic operator. We plan for all of that before the first footing is dug. That’s the difference between a gate that works for twenty years and one that’s off its track by spring.
Why Ironworks Gate Co. Is Westchester’s Preferred Gate Installation Company
We’ve been building and hanging gates for over 42 years, and Westchester homeowners keep calling us back because we respect what’s already there. The original wrought-iron gates on these postwar ranch homes are well made. The hardware attaching them is not. We don’t rip out good iron when the problem is a corroded hinge or a cracked footing. We rebuild what can be rebuilt and replace only what has to go.
Our technicians work in uniform, are background-checked, and treat your driveway like it belongs to their own mother’s house. Every job carries the 90-Day Done Right Promise, a written guarantee from Victor Salinas and the crew: if it’s not right, we come back and make it right. No paperwork. No arguing.
Victor Salinas has spent decades running gate crews across Los Angeles, and he’s trained every technician on the brands Westchester homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we show up, we have the parts and the knowledge on the truck. Most jobs are done in a single visit.
You’ll also reach a live person when you call, 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service. Someone who can look at the schedule and tell you when a crew can be at your door.
Our Gate Installation Services in Westchester
Driveway Gate
A driveway gate in Westchester has to do two jobs: it has to hold up to salt-laden marine air, and it has to work every single time. We’d guess most of the driveway gates we hang here are steel or aluminum. For steel, we specify galvanized and powder-coated frames. For aluminum, we use stainless hardware throughout. Both choices are the difference between a gate that looks new in five years and one with rust streaks running down the hinge side. We handle the full scope: new post footings, pilaster repair, gate fabrication, operator mounting, and safety photocells.
Pedestrian Gate
Side-yard and pedestrian gates in Westchester sit low to the ground, where sprinkler overspray and morning dew sit on the bottom rail. We install these with the same marine-grade hardware as driveway gates, because a sagging walk gate is one of the most common things we’re called to replace. If you’ve got an original 1950s iron walk gate with rotted wooden infill, we can reframe it, re-hang it on new galvanized hinges, and add a latch that won’t seize up in the damp.
Sliding Gate
Sliding gates are the workhorse for Westchester’s tight lots and shared driveways, especially where a swing gate simply won’t clear a neighbor’s fence line or a parked car. The thing to get right here is the track. Rack and pinion steel corrodes fast in this air, so we specify galvanized or powder-coated track and stainless rollers on every slide gate we install. On a shared driveway off 83rd Street near Loyola Marymount, we installed a sliding gate for a homeowner whose original swing gate couldn’t clear a neighbor’s fence line. We poured a new post footing for the rack and pinion track, mounted a LiftMaster operator with a safety photocell across the shared right of way, and set the panel on stainless rollers so the daily marine layer didn’t seize the track within a year. That’s the standard we bring to every slide gate install in Westchester.
Swing Gate
Swing gates are what most of these 1950s driveways were built for. The problem is the pilasters. Most original Westchester gate posts were poured as decorative columns, not structural supports for a 300-pound automatic gate leaf. When you bolt a heavy operator onto that post, the footing cracks and the post leans. We check the pilaster before we quote a swing gate. If the footing is sound, we reinforce the post with steel and through-bolts. If it’s not, we pour a new footing first. Then the gate gets hung. That order of operations matters.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westchester
We install and service all the major gate automation brands, and we service them properly. When a Westchester homeowner calls with a BFT operator that’s grinding or a Linear board that’s burned out, we don’t tell them to replace the whole motor. We fix what’s broken and tune the rest. We keep common parts for Viking and Ghost Controls operators on the truck, because those are the brands we encounter most on LAX-side driveways. If your gate has a brand on it, our techs have the training and the parts to work on it.
Common Gate Installation Problems We See in Westchester Homes
- Cracked 1950s pilasters. Original gate posts were poured for lightweight ornamental iron. A modern automatic operator torques them hard, the footing cracks, and the gate comes off its hinge. We repair or replace the footing before re-hanging the gate, every time.
- Corroded slide-gate track. Rack and pinion steel rusts fast in the salt air off Playa del Rey. When the track pits, the gate binds and strips the drive gear. We specify galvanized or powder-coated track for every slide gate in this neighborhood.
- Shared driveway conflicts. Plenty of Westchester homes share a driveway with a neighbor, which means property lines and fence setbacks dictate gate choice. A swing gate that crosses a neighbor’s fence line won’t pass inspection. We check the line before we quote.
- Undersized operator mounting plates. We see DIY brackets and handyman plates bolted to stucco with lag screws rated for a mailbox. The motor wrenches loose within a year. We mount operators on steel plates anchored into structural post or footing concrete.
Pricing for Gate Installation in Westchester, CA
Here’s what homeowners in Westchester can expect to pay for a new gate, installed and working. A single swing driveway gate with a basic automatic operator runs $3,200-$5,500. A sliding gate with a galvanized track and operator starts around $4,200 and can reach $7,500 for wider or heavier panels. A pedestrian gate alone runs $800-$1,800, depending on material and hardware. Adding a keypad or intercom adds $350-$900. If your pilaster needs a new footing, add $600-$1,200 per post.
- Swing driveway gate, single leaf: $3,200-$5,500
- Sliding driveway gate: $4,200-$7,500
- Pedestrian gate: $800-$1,800
- Pilaster footing replacement: $600-$1,200 per post
- Keypad or intercom: $350-$900
Every quote is written, itemized, and agreed before any work begins. You’ll know the number before we dig, before we weld, and before you write a check. Call (747) 340-9707 for a free measure. Estimates are free.
We Also Serve Cities Near Westchester
Our crews serve Westchester and the surrounding neighborhoods, including Gate Installation in Westchester and nearby communities like Inglewood, Westmont, Hawthorne, and West Athens. If you’re just outside the neighborhood line, call us. We probably already have a crew working close by, and the same Gate Installation standards apply no matter which side of the street you’re on.
Serving Westchester, CA - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Westchester
Yes, in most cases. A 10-foot-wide driveway can take a single-slide gate that runs along the property line, but you’ll need the panel to slide along the fence or wall rather than back over the driveway. We’ve installed slide gates on 10-foot-wide Westchester driveways many times, including shared driveways near 83rd Street where a swing gate physically could not clear the neighbor’s fence. The key is mounting a compact operator and carving out enough track run. We’ll measure it on the free visit and tell you straight whether a slide will work or if you’re better off with a swing. Call (747) 340-9707 to book a measure.
No, and you’d be wasting money if you tried. Once the pilaster footing is cracked, the post cannot hold the torque of any operator, new or old. We see this exact failure constantly on Westchester’s postwar ranch homes: the original pilaster was poured for lightweight decorative iron, and the modern operator torqued it until the footing split. We’ll remove the broken concrete, pour a new footing with rebar, set a steel-reinforced post, and then mount the new operator. Attempting to bolt a motor onto a cracked post will throw your gate off its hinges within months. The repair is not optional. Get a written quote for the footing first, then the operator.
A remote works fine if you’re the only one using the gate and you don’t mind reaching for the clicker. A loop detector, or vehicle exit loop, is the better choice for most Westchester driveways because it opens the gate automatically when a car pulls up, which matters when you’re sitting under the LAX approach with your hands full. It’s also safer for shared driveways, where tenants, visitors, and delivery trucks come and go. We can install both: a loop in the pavement just inside the gate and a handheld remote programmed to your operator. Most Westchester homeowners get the remote for daily use and add the loop for convenience and to keep the gate from closing on a car that’s not fully clear. The loop adds roughly $600-$1,000 to the job. We’ll quote it separately, and we’ll explain why before you commit.
You spec it right for the salt air and you never skip the hinge reinforcement. A swing gate sags when the hinge posts start to move or the hinges themselves corrode. In Westchester, the daily marine layer off Playa del Rey deposits salt moisture on every piece of exposed metal, so we use galvanized steel posts set in concrete, stainless or hot-dipped galvanized hinges, and a steel reinforcement plate through the full height of the post. We also set the gate with a slight upward cant, about a quarter inch, so that when a 300-pound leaf settles under its own weight, it doesn’t drag the latch side. A properly hung swing gate should need nothing more than a lube and adjust every few years. A sagging gate is a sign someone skipped the post work. We don’t skip it.
Sometimes, but most of the time you’re better off running a low-voltage line. Solar openers need four to six hours of direct sun to keep the battery charged, and Westchester’s morning marine layer can linger until late morning, especially on the bluff side. A shaded driveway, or one that faces north, will leave a solar panel hungry and the gate dead at the worst possible time. We install solar when the panel can be mounted in consistent sun, and we’ve done many successful solar setups in Westchester. For a shared driveway with limited sun, we’d recommend a hardwired low-voltage run in conduit along the fence line. It’s reliable, it’s not expensive, and it works on any day, foggy or not. Call us at (747) 340-9707 and we’ll walk you through both options on site.
Get Your Free Gate Installation Estimate in Westchester
The right gate, on the right footing, with hardware that survives the salt air. That’s what we deliver in Westchester. Call (747) 340-9707 to schedule a free measure with a uniformed technician who will tell you exactly what needs to happen and what it costs before the first bolt is turned. Quotes are free. The work is guaranteed in writing for 90 days, and if anything’s not right, we come back and fix it. Victor Salinas and the whole Ironworks Gate Co. crew stand behind it. Call us today and join the Westchester homeowners who never want to think about their gate again.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Westchester and the surrounding Los Angeles area.