Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Inglewood Homeowners
A gate that won’t open, sags on its hinges, or makes a grinding noise every time it moves is more than a nuisance. It’s a security problem and a daily frustration. For Best Gate Repair in Inglewood, CA, pricing typically runs $180 to $650 depending on the issue, and most jobs are completed in a single visit. Ironworks Gate Co. has been fixing driveway and estate gates for over 42 years, and our technicians arrive with the parts and training to get your gate working right the first time. Call (747) 340-9707 and you’ll reach a live person, any hour of any day.
Victor Salinas leads our team at Ironworks Gate Co. He started this company in 1984, when a gate was a simpler piece of ironwork and the motor was a separate concern. Today the two are inseparable, and so is the craft needed to repair both. We’re not a handyman service that occasionally looks at a gate. We’re gate specialists, and that’s all we do.
What Our Gate Repair Service Includes
Every gate repair starts with the same question: what changed, and when did it start? From there we work outward. Here’s exactly what we handle, and how we approach each type of repair.
Electric Gate Repair
Electric gates fail for predictable reasons: a motor that’s burned out, a control board that’s stopped responding, a sensor that’s drifted out of alignment, or wiring that’s been chewed through or corroded. What we do is trace the actual fault rather than swapping parts on a guess. Our technicians carry diagnostic equipment to test voltage, continuity, and motor load before any part is replaced. That’s how we keep the bill to what was actually wrong, not what someone assumed was wrong.
Automatic Gate Repair
Automatic gate systems involve three separate systems working together: the mechanical gate itself, the opener that drives it, and the safety devices that watch over it. When one of those is off, the whole system misbehaves. A gate that reverses for no reason, pauses halfway, or won’t close on the sensor is usually not the motor. In Inglewood, we see Emergency Gate Repair in Inglewood, CA needs most often from sun-damaged wiring, misaligned photo eyes, and limit switches that have simply worn out. We test the full system before we touch anything, so the repair fixes the root cause.
Hinge & Post Repair
Hinges carry the entire weight of the gate every time it opens and closes, and they eventually wear. A gate that drags on the ground or has a visible lean is telling you the hinges or the post have failed. We replace worn hinge pins, cut out bent or cracked hinge plates, and weld new ones in place. When a post has shifted because of soil movement or root pressure, we reset it in concrete or reinforce it with steel, because no hinge works well on a post that’s no longer plumb.
Gate Realignment
An out-of-alignment gate is often the first sign that a hinge is failing or a post has settled. Sometimes it’s as simple as a hinge pin that’s worn oval, and sometimes it’s a post that’s been pushed by the expanding clay soil common in Inglewood’s older neighborhoods. We check the gate for square, measure the reveal at both ends, and bring it back to true. A properly aligned gate closes tighter, seals better, and stops wearing out its own hardware.
Lock Repair
A gate lock that sticks, won’t turn, or won’t catch is a security problem that gets worse. We repair and replace mechanical locks, magnetic locks, and the electronic strikes that work with keypads and intercoms. Many Inglewood homes built in the 1960s and 70s still have their original gate hardware, and those locks reach a point where repair isn’t the honest answer. We’ll tell you when it’s time to replace, and we’ll quote you the number before we do the work.
Weld & Rust Repair
Steel and wrought iron gates in Inglewood live in salty coastal air and Inland heat, and rust is a steady fact of life. Surface rust is a cosmetic issue; rust that’s pitted the metal or cracked a weld is structural. We grind out the corrosion, cut back to solid metal, and weld in new material. Then we treat and prime the repair so it doesn’t return in six months. This is where our blacksmith background shows, because a good weld isn’t just about strength, it’s about keeping the gate looking like it was never worked on at all.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We’re trained and equipped on nine major gate-automation brands, and we keep common OEM parts stocked for several of them. DoorKing is one we see constantly in Inglewood, particularly on older sliding driveway gates. We know their swing and slide operators well, and we carry the limit switches, loop detectors, and control boards that fail most often. When a DoorKing unit acts up, we’re usually able to diagnose it in one visit.
Elite and LiftMaster openers are also common alongside Hawthorne Gate Repair calls in this part of Los Angeles. Elite’s slide operators show up on a lot of estate and long-driveway gates, and we’ve rebuilt enough of them to know their weak points. LiftMaster’s residential line is popular on newer installations, and we service their AC and DC models, including the security and battery backup systems. Mighty Mule is the brand we see on lighter-duty gates, often homeowner-installed, and those units typically fail at the control board or the actuator arm. Whatever brand is on your driveway, we can work with it.
Signs You Need Gate Repair Right Now
- The gate won’t open or close all the way. This almost always starts as an intermittent problem and becomes permanent. The cause is usually a failing limit switch, a worn gear, or an obstruction the motor can’t overcome, and running it further can damage the opener.
- The gate is visibly leaning or dragging. A sagging gate puts load on the hinges, then the opener, then the post. Left alone, a leaning gate becomes a fallen gate, and the repair bill triples.
- You hear grinding, squealing, or thumping. Metal-on-metal noise means something is wearing. The longer it runs, the more parts get damaged. Early repair is always cheaper.
- The gate reverses unexpectedly or doesn’t close on the sensor. This is often a photo eye or safety edge issue, but it can also be a control board fault. A gate that doesn’t close securely isn’t doing its job as a security barrier.
- The lock sticks or the gate won’t latch. A gate that doesn’t latch can be pushed open by wind, a delivery person, or anyone who tries. In Inglewood, a working lock is the minimum standard for a working gate.
Our Gate Repair Process - Step by Step
We follow the same order on every job because it works. No surprises, no shortcuts, no upsells you don’t need.
- 1
Diagnosis. We start by listening to what you’ve noticed: when it started, what it sounds like, whether it happens every time or only sometimes. Then we test everything. On an electric gate, that means checking voltage at the motor and control board, testing the safety sensors, and running the gate through its cycle to observe the behavior directly.
- 2
Written quote before any work. Once we know what’s wrong, we tell you what it costs to fix. You approve the number before we turn a wrench. That’s the whole agreement. The price you hear is the price you pay.
- 3
The repair. Most gate repairs are done on the same visit. Our trucks carry the common parts, and for days when a part must be ordered, we’ll tell you that up front and give you a real timeline, not a vague “next week maybe.”
- 4
Testing. After the repair, we cycle the gate repeatedly. We test the safety features, the limits, the lock, and the manual release. If the gate opens ten times in a row the way it should, we’re satisfied. If not, we keep working until it does.
- 5
The walk-through and the Done Right Promise. We show you what we fixed and explain how to keep it running. Every repair is covered by our 90-Day Done Right Promise in writing. If something’s not right within 90 days, we come back and make it right. No arguing, no paperwork, no exceptions.
How Much Does Gate Repair Cost in Inglewood?
our Gate Repair in Inglewood runs a wide range because the work does. Here’s what we typically see:
- Hinge replacement or realignment: $180-$350 depending on gate size and how many hinges are involved.
- Lock repair or replacement: $120-$280 for mechanical locks; electric strikes and magnetic locks run higher.
- Weld or rust repair: $200-$500 based on the extent of the corrosion and how much fabrication is required.
- Electric gate diagnosis and minor repair: $150-$400 for sensors, limit switches, and wiring.
- Control board or motor replacement: $400-$900+, depending on the brand and model.
No honest gate repair company can quote you a real price over the phone without seeing the gate. What we can tell you is that our diagnostics are part of the visit, our quotes are free, and the number we give you is the number on the invoice. We currently offer $50 off any repair over $250, and we’ll always honor a free second opinion on any written estimate you’ve received from another company. Seniors and veterans get 5% off, always.
Gate Repair Near Inglewood - Our Service Area
We work throughout Inglewood and the surrounding communities, including Westmont, Hawthorne, West Athens, Ladera Heights, Westchester, El Segundo, Culver City, Lawndale, Gardena, Manhattan Beach, and Playa del Rey. Most calls in Inglewood get a same-day visit, and our service area is built around getting to you quickly. If you’re in a neighboring community, check our Gate Repair in Westmont or Gate Repair in Hawthorne pages for details. And if you need the full picture of our company, our home page covers everything we do.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Inglewood
Gate repair covers any work needed to restore a driveway or estate gate to proper working order. That includes mechanical work like hinges, posts, locks, and welding, plus electrical work on motors, control boards, sensors, and wiring. At Ironworks Gate Co., we handle the full range under one roof, which means we don’t pass you off to a different company when the problem spans both mechanical and electrical systems.
Most repairs we handle in Inglewood are completed the same day, during the first visit. Simple hinge replacements, lock repairs, and sensor alignments typically take one to two hours. Board or motor replacements can take longer depending on the opener model, and any custom metal fabrication adds time because the welding is done properly, not rushed.
Gate repair costs vary by the work required. A hinge replacement might run $200 while a full motor and control board replacement can exceed $900. We provide a written quote before any work begins, and that quote includes parts, labor, and no hidden fees. We also offer $50 off repairs over $250 and a free second opinion on any competing written estimate. Call (747) 340-9707 for a free diagnostic and quote.
Yes. We’re trained and equipped on nine major brands, including DoorKing and LiftMaster, and we stock common OEM parts for both. We diagnose and repair these systems daily across Inglewood. Whatever brand is on your gate, we can service it.
In most cases, yes. We keep our schedule built for same-day response in Inglewood because a gate stuck open is a real problem. And a live person answers our phone 24 hours a day, 7 days a week. If you call (747) 340-9707, you won’t get a voicemail tree.
Every repair we complete is backed by our 90-Day Done Right Promise in writing. If something isn’t right within 90 days of the repair, we return and make it right at no additional cost. No fine print, no arguing.
Clear the area around the gate so our technician can access both sides, and if you have a gate opener, have the remote controls available for testing. Make sure we can access the control box and the motor housing. If you know the brand of your opener or when the gate was installed, that information helps our technician arrive prepared. There’s nothing else you need to do.
Schedule Your Gate Repair Service in Inglewood Today
A gate that doesn’t work right is a problem you’ll deal with every single day until it’s fixed. Don’t keep wrestling with it. Call (747) 340-9707 and tell us what your gate is doing. We’ll get a technician to your Inglewood home, give you a real number in writing, and stand behind the work with our 90-Day Done Right Promise. Estimates are free, and a live person is waiting on the other end of the line right now.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood since 1984.