Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Inglewood Owner’s Guide

Ghost Controls keypad and intercom repair in Inglewood typically runs $165 to $385 installed, and most jobs are finished the same day we arrive. If your keypad works only when it wants to, or your intercom crackles and cuts out mid-sentence, those are usually the first signs a component has reached the end of its service life. We stock Ghost Controls-compatible keypads and intercom modules on our trucks, so the repair often happens in one visit.

Call (747) 340-9707

Most homeowners in Inglewood discover the problem the same way: they pull up to the driveway at night, key in their code, and nothing moves. Or a delivery driver rings the intercom and the speaker squeals instead of connecting. By the time we get the call, the owner has usually replaced the batteries twice, wiped down the keypad, and maybe given it a firm tap. The tap rarely helps.

Key Takeaways

• Installed Ghost Controls keypad and intercom repair in Inglewood: $165 to $385 depending on the part and your gate’s wiring.
• We quote the full price before any work begins. No surprise invoices.
• Most repairs are same-visit because we carry Ghost Controls-compatible parts on the truck.
• Every job is covered by our written 90-Day Done Right Promise.
• Call (747) 340-9707 for a free estimate. A live person answers.

Which Ghost Controls Models This Applies To

Ghost Controls builds keypads and intercoms for its full lineup of swing and slide gate openers, and the parts are largely cross-compatible across the AXD, AXDP, and TSS1 series systems. The keypad we install most in Inglewood is the Ghost Controls AXS1 wireless numeric keypad, which pairs to every opener the company currently ships. If your opener is an older Ghost Controls model with a hardwired keypad terminal, the wiring runs to the control board’s accessory port, and the replacement keypad needs to match that voltage.

Here is the compatibility gotcha most owners miss: Ghost Controls wireless keypads changed radio frequency across some production years. An older keypad will not simply pair with a newer opener board, and a newer keypad will not register on an older receiver. The fix is usually straightforward once we check the model number sticker inside your opener cover. That sticker tells us the production year and board revision, and it determines whether you need an OEM keypad or a quality aftermarket equivalent that matches the frequency. For intercom modules, Ghost Controls pairs with a handful of wired and wireless door stations, and the wiring gauge matters more than most people expect. In Inglewood’s salty evening air, corroded terminals and oxidized connectors cause at least as many intercom failures as failed microphones do.

Ironworks Gate Co. is an independent service provider. We are not affiliated with Ghost Controls, but we stock their compatible parts alongside LiftMaster, Mighty Mule, and DoorKing components, so the right part is on the truck the first time.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

• The keypad accepts the code but the gate does not move. The transmitter inside the keypad has drifted off frequency or the membrane contacts under the buttons are worn flat. This is the most common Ghost Controls keypad failure we replace in Inglewood, and it usually announces itself gradually: the gate responds from twenty feet away, then ten, then only when you stand beside the post.
• The keypad backlight flickers or stays dark. Ghost Controls keypads run on AA batteries, and while a dim display often just means dead batteries, a backlight that stays dark after fresh batteries points to a failing control chip on the keypad board. At that point the part is done.
• The intercom buzzes instead of carrying voices. This points to a bad ground or a corroded speaker terminal, often where the wire enters the call box. In Inglewood, morning condensation against the call box accelerates that corrosion, especially on east-facing gates that catch the marine layer off the coast.
• The intercom sounds like the other person is underwater. A worn microphone diaphragm or a swollen speaker cone does this. The fix is a new call station module, not a louder yell.
• The keypad buttons need to be pressed twice or three times to register. The silicone membrane under the keys has compressed with age and ultraviolet exposure. Inglewood sun is hard on driveway hardware; we see keypads on south-facing posts fail years faster than shaded units.

Replacement Cost & What’s Included

Ghost Controls keypad replacement in Inglewood runs from $165 to $245 installed for a standard wireless keypad, while intercom station repair or replacement runs from $210 to $385 installed depending on whether we are swapping a call box module, running a fresh section of wire, or replacing the speaker and microphone assembly. The spread mostly comes down to the age of your opener and whether the existing wiring can be reused.

Every quote includes the part, the labor, and the programming to pair the new keypad or intercom with your opener board. We agree on the price before a single wire is pulled. If the new part fails within 90 days, our Done Right Promise covers it in writing: we come back, make it right, no paperwork, no argument. That is how every Ghost Controls repair we do in Inglewood is priced and guaranteed.

DIY or Call Us?

For a Ghost Controls keypad, a homeowner can safely pop the cover and swap the batteries, and they can wipe the lens with a dry cloth. That is where safe DIY ends. The wires behind a hardwired keypad carry low-voltage current from the opener board, but if you short the wrong terminals, you can take out the control board itself, and that turns a $200 repair into a $600 one.

Intercom wiring is worse when it goes wrong, because the call station shares ground with the opener motor. A crossed wire can back-feed voltage into places it should not go. Victor Salinas has lost count of how many Inglewood driveways he has pulled up to where a well-meaning handyman left a board smoked from a miswired keypad. The honest advice: check the batteries once, then let us diagnose it. We do it right once, so you do not have to call twice. Call (747) 340-9707 and we will walk you through it over the phone first.

FAQs

Call Ironworks Gate Co. for Ghost Controls Keypad & Intercom Repair in Inglewood

If your Ghost Controls keypad or intercom is acting up, call (747) 340-9707. We give you a straight answer over the phone, a written price before any work starts, and a 90-Day Done Right Promise on every repair. We have been fixing driveway gates in Inglewood for over 42 years, and we answer the phone 24 hours a day. No voicemail trees, no waiting until Monday.

Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Inglewood and nearby areas.