Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Motor & Opener in Inglewood: What to Know First
We provide independent Ghost Controls gate motor and opener repair, installation, and replacement throughout Inglewood, and most jobs are completed in a single visit. A typical Ghost Controls repair in this area runs between $225 and $485, depending on whether we are replacing a control board, a linear arm, or a full motor assembly. You will know the exact price before we turn a single bolt, and every job carries our written 90-Day Done Right Promise.
This page is for Inglewood homeowners who already own a Ghost Controls opener, or who are considering one and want to know what they are really in for. Call (747) 340-9707 and a live person will answer, day or night.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds a solid residential opener, but we see the same handful of failures across Inglewood driveways year after year. Here is what actually goes wrong, and what we do about it.
- AXDP and TSS1 linear arm motors with stripped internal gears. The Ghost Controls TSS1 and the automatic dual-pull-to-open AXDP are common on single-swing gates in the Morningside Park and Ladera Heights areas. Over time, the plastic reduction gear inside the actuator strips, especially on heavier tube-steel gates. The motor hums but the gate does not move. We replace the gear set or the complete actuator, whichever the arm’s age and wear call for.
- Control board failures after Inglewood power surges. Ghost Controls boards are sensitive to voltage spikes, and this city gets its share of brownouts during summer heat waves and Santa Ana wind events. We see blown relays and fried transformer inputs on the GHO and R Series boards regularly. The fix is a proper board replacement, and we often add a surge suppressor at the same time so the new board does not meet the same end.
- Limit switch drift on slide motor installations. The Ghost Controls SLS and SLS2 slide openers use magnetic limit switches that can drift out of alignment, causing the gate to stop short or overrun the track. It is a simple adjustment, but if the magnets have shifted on the rail, the fix has to be done with the gate dead-level and the chain tensioned correctly, or it will happen again in a month.
- Photocell and edge sensor false trips on the XP series. The Ghost Controls XP lines pair with wireless reflective eyes and edge sensors. In Inglewood, direct afternoon sun off a west-facing stucco wall or a parked car can blind the photocell beam, and the gate refuses to close. Sometimes it is an alignment issue. Sometimes the sensor has simply failed. We test, isolate, and replace only what is actually bad.
- Battery backup systems that do not hold charge. Many Inglewood homes add the Ghost Controls battery backup kit, and we regularly find dead or swollen 12V cells after two to three years of South Bay heat. The opener works on AC power but dies the moment the utility feed blinks. We test the batteries under load and replace the pair when needed, using sealed AGM cells that put up with heat better than the original gel cells.
Our Ghost Controls Gate Motor & Opener Process
Here is how a Ghost Controls service call goes when you call Ironworks Gate Co.
- 1
You call, a person answers. We ask what the gate is doing, what model you have, and whether the opener beeps, clicks, or stays silent. That tells us which parts to bring.
- 2
We show up on time and diagnose. Our technician tests the arm or slide motor, the board, the battery, and the safety edges. We find the actual fault before touching anything else.
- 3
We quote the repair in writing before work starts. We give you one price, parts and labor included. If the job is small, we may have it done before another company would have returned your call.
- 4
We use OEM or proven aftermarket parts, whichever is the better long-term call. Ghost Controls OEM parts keep the manufacturer warranty intact. Where an aftermarket part genuinely outlasts the OEM version, we tell you and let you decide.
- 5
We test the gate the way a homeowner uses it. Full open, full close, obstruction reversal, auto-close timing, and solar or battery backup if equipped.
- 6
We clean up and hand you the 90-Day Done Right Promise in writing. If anything is not right, we come back and make it right. That is the whole point.
What Ghost Controls Gate Motor & Opener Costs in Inglewood
Real numbers, so you know what to expect before you call.
- Diagnostic visit with minor adjustment: $89 to $145
- Limit switch or sensor replacement: $160 to $240
- Control board replacement (OEM): $280 to $410
- Linear arm actuator replacement: $340 to $520
- Full slide motor replacement (SLS series): $620 to $890
- Complete Ghost Controls opener package with installation: $1,150 to $1,600, depending on gate weight and access
What moves the price is the model series, the age of the unit, and whether the gate itself is binding due to sagging hinges or a warped frame. A Ghost Controls opener fighting a dragging gate will burn through gears and boards twice as fast, so we always check the gate itself before recommending a motor repair. Estimates are free, and the price we quote is the price you pay. Call (747) 340-9707 for an exact figure on your gate.
Why Inglewood Homeowners Call Ironworks Gate Co. for Ghost Controls Work
We have been doing this in Inglewood since 1984, and we plan to be here another forty years. That matters, because a company that expects to see you at the market or the football game does not walk away from an unfinished job. Victor Salinas grew up in Morningside Park and still runs Ironworks Gate Co. out of the same city. We are the shop other contractors call when a Ghost Controls unit has already been misdiagnosed once and the homeowner is done experimenting.
We service nine gate-automation brands, so when you call us for Ghost Controls and we notice a LiftMaster, Mighty Mule, or DoorKing system on the property too, we can address the whole picture. Every job gets our 90-Day Done Right Promise in writing, and a live person answers the phone 24 hours a day, 7 days a week. We do it right once, so you do not have to call twice.
FAQs
No. As an independent Ghost Controls service provider, we are not a factory authorized shop, but using OEM Ghost Controls parts keeps any remaining warranty intact on the components we replace. If your opener is still under warranty, we will help you determine what is covered before we quote anything.
Most Ghost Controls repairs in Inglewood are completed the same day we arrive. We stock common Ghost Controls control boards, limit assemblies, and gear sets for the TSS1, AXDP, and SLS lines, so there is usually no waiting on parts. If your exact part is not on the truck, we tell you before we begin and schedule the follow-up immediately.
If the opener is under five years old and the gate itself is in good shape, repair is usually the right call. Once a unit passes eight to ten years, and especially if the gate is heavy, we often recommend replacing the actuator or the full opener rather than pouring money into an aging board and motor. We will give you a straight answer with real numbers for both paths, and the decision stays yours.
Yes. We service the Ghost Controls solar-compatible systems, including panel output testing, battery health checks, and controller diagnostics. The biggest solar installation mistake we see in Inglewood is panel placement that does not get enough direct sun due to mature trees or rooflines, and we correct that during the same visit.
We install Ghost Controls openers on any gate that is structurally sound, whether we built it or another company hung it. If the gate is too heavy, sagging, or not plumb, we will tell you, because no motor will fix a bad gate. We can repair the gate and install the opener in the same job if you want it done once and done right.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Inglewood and nearby areas.