Ghost Controls Gate Repair Nationwide

Ghost Controls Gate Repair in Inglewood: What to Know First

Independent Ghost Controls gate repair in Inglewood typically runs $175 to $550 depending on whether we’re replacing a control board, a limit switch, or repairing physical gate damage at the hinge. Most Ghost Controls jobs in our shop are completed in one visit. We quote the price before any work begins, and that number does not move when the bill comes.

Call (747) 340-9707

This page is for Inglewood homeowners who own a Ghost Controls opener and have a gate that no longer opens, opens partway, or opens when nobody asked it to. If you’re standing at the keypad right now wondering whether to call, call. A live person answers at (747) 340-9707, 24 hours a day, every day, and we’ll tell you straight whether it’s a simple fix or something that needs a service call. Victor Salinas grew up in Morningside Park and has repaired enough Ghost Controls boards in Inglewood to know exactly where to start looking.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls builds solid residential swing and slide gate openers, but every brand has its patterns. These are the five we see most often on Inglewood driveways.

• AXDP and HYPRO control board failure from Inglewood heat and salt air. The AXDP and HYPRO series are common on single-swing gates here, and their boards do not love the combination of warm inland summers and moisture that drifts in off the coast. Symptom: the gate opens fine, then won’t close, or the opener beeps but the motor never engages. The fix is usually a board replacement or a relay repair, not a motor replacement, which saves hundreds. We won’t sell you a motor you don’t need.
• ALSP limit switch drift causing the gate to overshoot and slam. Ghost Controls adjustable limit switches on the ALSP series ride inside a plastic housing that gets brittle after years of Inglewood sun. When the housing cracks, the switch creeps, and the gate begins to overshoot its stop, then slam against the post. That’s the sound that wakes a neighborhood. We replace the switch assembly and set the stops precisely, then run the gate through ten full cycles while you watch.
• Rust-jacked hinge plates on TSS1 slide gate models. The TSS1 is a workhorse for Inglewood slide gates, but its mounting plates sit low and catch sprinkler overspray. Corrosion builds between the plate and the post, and the gate starts binding mid-travel. The opener pushes harder, and the amp draw climbs until something gives. We grind the rust back, treat the post, and remount with fresh hardware. On badly compromised posts, we weld in a new footing plate.
• Gearbox stripping from gates that were never properly balanced. Ghost Controls makes a strong gearbox, but no gearbox survives a gate that sags at the hinge. When the gate is heavy on the latch side, every cycle eats the drive gear a little more. We don’t just replace the gear; we true the hinge line first so the next gearbox lives the life it should. A gate repair that ignores the hinge is half a repair.
• Interference and wiring problems from non-Ghost accessories retrofitted over the years. We see it often: a homeowner adds a generic photocell or a third keypad, splices it into the Ghost Controls control board, and now the gate reverses for no reason. Ghost Controls boards are picky about what they talk to. We trace the wiring, identify what doesn’t belong, and wire the system back to spec. When it’s a genuine parts failure, we use OEM Ghost Controls parts when they’re available, and we’re straightforward when a quality aftermarket part will do the same job for less.

Our Ghost Controls Gate Repair Process

Every Ghost Controls job follows the same sequence, whether it’s a control board swap or a full hinge rebuild. You’ll know what we’re doing and what it costs before we start turning bolts.

1. 1
   You call (747) 340-9707. A live person answers, 24/7. We ask what the gate is doing, what opener model is on the post, and how long it’s been acting up. That tells us which parts to bring.
2. 2
   We arrive when we say we will. The technician is background-checked and uniformed. They listen first, then look at the gate, the hinges, the opener arm, and the board, because many Ghost Controls failures start somewhere mechanical, not electrical.
3. 3
   We give you a written price before any work starts. That price covers parts, labor, and cleanup. If we open something up and find an additional problem, we stop and call you over. Nothing gets added without your go-ahead.
4. 4
   We handle the repair and the parts decision honestly. Where it matters for reliability and warranty, we use Ghost Controls OEM parts. Where an aftermarket part will outlast the original, we tell you and price it fairly.
5. 5
   We test the gate in front of you. Ten full cycles minimum, including obstruction reversal and stops. If it doesn’t close square and shut quietly, we’re not done.
6. 6
   You get the 90-Day Done Right Promise in writing. If it isn’t right within 90 days, we come back and make it right. No paperwork, no arguing, no exceptions. That’s the Keystone Standard we’ve run every job on for over 42 years.

What Ghost Controls Gate Repair Costs in Inglewood

Most Ghost Controls gate repairs in Inglewood fall between $175 and $550. Here’s what that covers in plain numbers.

• Limit switch assembly replacement: $175-$250. Includes parts, adjustment, and full-cycle testing.
• Control board repair or replacement: $240-$420 depending on the board series and whether we can repair the relay or need a full board.
• Hinge and post repair on a Ghost Controls swing gate: $300-$550. Welding, grinding, and rebalancing included.
• Full gearbox replacement with hinge rebalancing: $400-$650. Done once, done right.
• Wiring and accessory diagnosis (keypad, photocell, safety edge): $150-$300 including the repair.

What moves the price is the part that failed and the condition of the gate behind it. A board swap on a balanced gate is fast. A board swap on a gate that’s been dragging for two years is not, because we won’t leave the root problem sitting there. You’ll get a free estimate, and the price we quote is the price you pay. Call (747) 340-9707 and we’ll put a number on it the same day.

Why Inglewood Homeowners Call Ironworks Gate Co. for Ghost Controls Work

We’ve been repairing gates in Inglewood since 1984, and we’ve watched a lot of one-truck outfits come and go. Homeowners want someone who will still be here when the warranty needs to mean something. Our 90-Day Done Right Promise is written on every invoice, and we honor it without a phone argument. The tech who shows up is background-checked, uniformed, and certified on nine gate-automation brands. Ghost Controls is our specialty here, but when an Inglewood home has a LiftMaster on the side gate, a Mighty Mule on the back, and a DoorKing on the main, one truck can fix all three in the same visit. That saves you the second service fee and the second afternoon off work. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always get 5% off. We do it right once, so you do not have to call twice.

FAQs