Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Los Angeles
Gate repair in Los Angeles typically runs $180 to $650 depending on the failure, and we can usually schedule a technician to your property within one business day. Los Angeles presents a set of gate problems you don’t see in many other cities: Santa Ana winds that shove solid iron gates around like they’re made of plywood, marine-layer moisture that rusts 1980s-era welds from the inside out, and post footings that shift in liquefaction-prone fill under the 90001-90003 ZIP codes. Our Gate Repair team works these neighborhoods every week. Call (747) 340-9707 and a live person answers, any hour.
Why Ironworks Gate Co. Is Los Angeles’s Preferred Gate Repair Company
We’ve spent four decades working driveway gates the way a blacksmith works iron: with patience, the right heat, and no shortcuts. Los Angeles homeowners call us because we’re not a generalist handyman outfit that takes a stab at a gate and hopes for the best. We’re a dedicated gate company, and frankly that’s all we do.
The difference shows up fast. When a Florence homeowner calls about a sagging 1940s swing gate, we already know what we’re likely to find before we even back the truck out of the yard. That’s because so many security gates in the 90001-90003 ZIPs were hung by the same small cluster of local fabricators in the early 1990s. Same hinge geometry, same track gauge, same opener units. We stock for it.
Every tech who comes to your home is background-checked and uniformed. They work the way they’d work on their own mother’s driveway. And every completed job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing.
Victor Salinas owns Ironworks Gate Co., and he still answers the phone himself most days. That’s how the company runs.
Our Gate Repair Services in Los Angeles
Hinge & Post Repair
The single most common failure we see across South LA is a hinge post that has tilted out of plumb. Cinderblock and poured-concrete pilasters are the standard post construction in Florence, Green Meadows, and Watts, and they crack predictably when the underlying soil shifts. Add a Santa Ana gust over 50 mph against a solid wrought-iron swing gate, and a hairline post crack becomes a blown gate in seconds. We dig out the old footing, re-foot the post with deeper concrete, and re-hang the gate so it swings true and closes clean.
Gate Realignment
A gate that drags on its track or won’t latch isn’t lazy; it’s telling you something. In Los Angeles, the message is usually seismic settling or wind stress. Minor fault activity in the 90001-90003 footprint shifts gate posts just enough to put swing gates out of alignment, which makes rack and pinion systems bind and roller wheels chew through track. We realign the gate and dial in the opener force so it isn’t fighting itself on every cycle.
Weld & Rust Repair
LA’s year-round UV load is brutal on powder-coat and paint. Once the coating fails at a weld joint, the marine layer that creeps inland every night through these South LA neighborhoods keeps that bare metal damp for hours. Rust sets in and the weld eventually shears. We cut out the rot, weld in fresh steel, and refinish the joint to stand up to sun and salt air. If you want it to look like it did in 1994, we can do that too.
Electric Gate Repair
When an opener motor strains against a wind-loaded gate or a misaligned track, it burns out. We service and repair electric gate systems across Los Angeles, including replacement motors, limit switches, control boards, and safety edges. Most electric gate repairs are completed in a single visit, with the price agreed before a single bolt is turned.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
We’re trained and equipped on nine gate-automation brands, and on service calls around Los Angeles we regularly see Viking, Linear, and DoorKing openers on older 1990s security gates, plus Ghost Controls units on newer installations. Because we carry parts for these systems on the truck, the correct fix is usually made on the first visit. Whatever is bolted to your driveway, we likely have the part and the training to make it work right.
Common Gate Repair Problems We See in Los Angeles Homes
- Santa Ana wind damage: Gusts over 50 mph bend slide tracks and blow solid infill swing gates off their hinge posts, especially when the post base is already cracked from minor seismic settling. After a wind event, we see a spike in calls from the Florence and Green Meadows corridors.
- Rust at weld joints: Decades of UV degrades powder-coat, bare metal is exposed, and nightly marine-layer moisture accelerates rust at the exact points where 1980s-era wrought-iron gates were welded to tubular frames.
- Post footings shifted by soil movement: Post footings in liquefaction-prone fill under 90001-90003 shift just enough during minor quakes to put swing gates out of plumb, causing rack and pinion or roller wheels to bind and burn out opener motors.
- Aged openers on original tracks: A massive share of Los Angeles gate inventory was installed 30-40 years ago during the crime-response boom. These early-90s US Automatic and Mighty Mule units are tired, and the roller wheels on original tracks are worn thin.
Pricing for Gate Repair in Los Angeles, CA
- Hinge & post repair: $220-$550, depending on post type and whether a re-footing is required.
- Gate realignment: $150-$350 for most swing and slide gates.
- Weld & rust repair: $180-$450 per weld section, including refinishing.
- Electric gate opener repair: $200-$650, depending on the component.
- Service call + diagnostic: $89, credited toward any repair over $250.
These are Los Angeles market rates for the work we do. The price you’re quoted is the price you pay, agreed before the first bolt is turned. We also run standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Estimates are free. Call (747) 340-9707 to schedule one.
How Santa Ana Wind and Marine-Layer Moisture Shape Gate Repair in Los Angeles
In the 90001-90003 ZIP codes alone, the dense 1920s-50s bungalow and duplex housing stock means there is roughly one residential security gate per lot, a concentration unmatched outside South LA. Many of those gates were installed by the same small fabricator cluster in the late 1980s and early 1990s, which means local technicians who know the area can pre-load exact hinge geometry, track gauge, and opener parts before even arriving on site. That’s not something a generic gate repair page can tell you, and it’s not something a one-truck handyman from another part of the county can do.
Our crew recently reset a tilted cinderblock hinge post on a 1940s stucco bungalow in Florence after a Santa Ana gust flexed a solid wrought-iron swing gate enough to shear two hinge welds. Because so many nearby gates share the same early-90s US Automatic opener and hinge geometry, we carried the correct post brackets and a replacement limit switch on the truck. We dug and re-footed the post with deeper concrete, re-hung the gate, and dialed in the opener force so it wouldn’t strain on windy nights. The whole job was done in one visit, with the price agreed before we started.
This page gives you the South LA-specific repair knowledge, from Santa Ana wind failures to matching 1990s fabricator hinge geometry, that a generic gate repair page simply cannot.
We Also Serve Cities Near Los Angeles
Ironworks Gate Co. provides Gate Repair in Los Angeles and the surrounding communities, including Gardena, Inglewood, Hawthorne, and Lawndale. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve the metro locally. If your gate is in any of these cities, the same team, the same trucks, and the same written 90-Day Done Right Promise apply.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Los Angeles
Your opener has a manual release, usually a small handle or keyed lever on the motor housing, that disconnects the drive so you can swing the gate by hand. We recommend locating it before you need it. Once it’s released, push the gate slowly and keep your hands away from the hinge side. After power returns, re-engage the drive and test the full open-close cycle. If the gate is bent or the post shifted from the wind, don’t force it; call (747) 340-9707 and we’ll get a tech out to assess it properly.
Because sagging is rarely a hinge problem. On Los Angeles gates of that era, the usual culprit is a post that has tilted out of plumb from soil settling or a past wind event. Adjusting hinges or shimming the gate just masks it. The post needs to be re-footed and reset, then the gate re-hung straight. We do this work regularly in Florence and Green Meadows, and we’d rather fix the cause than sell you a hinge adjustment that won’t hold. Call (747) 340-9707 for an exact quote.
Yes. Current UL 325 safety standards require entrapment protection on automatic gate systems, and in Los Angeles, a gate that reverses against a person or object without a functioning safety edge or photo-eye is a liability on your property. Many 1990s systems were installed before these standards were enforced. Our techs can inspect your opener and retrofit the required safety devices without replacing the entire system if the motor itself is still sound. Estimates are free.
Stop using the gate and switch the opener off. The motor is likely straining against the wind load on the gate face, and repeated cycling under that strain will burn out the motor or strip the drive. Wait for the wind to settle, then run a full cycle with the gate unloaded. If the opener still reverses mid-cycle, the force settings or limit switch need service. Call (747) 340-9707 and we’ll diagnose it on site.
In most cases, yes. We keep common hinge geometries, track gauges, and roller wheel styles in stock because we know which fabricators supplied these gates in the 1980s and 1990s. We also weld custom brackets when an exact replacement isn’t manufactured anymore. If your gate was hung by a local fabricator who’s long gone, bring us a photo and we’ll tell you what’s possible before you commit to anything.
Call Ironworks Gate Co. for Gate Repair in Los Angeles
If your gate is sagging, rusting, grinding, or simply won’t close, call (747) 340-9707. A live person answers 24 hours a day, 7 days a week. We’ll give you an honest diagnostic, a free estimate, and a written price before any work begins. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Angeles gates for over 42 years.